Neware Pouch Cells Battery Tester and 200L Constant Temperature Chamber

Original price was: $5,200.00.Current price is: $5,000.00.

Neware Constant Temperature Test Chamber aims to test battery performance under constant temperature by simulating room temperature condition.  it can analyze and evaluate whether the battery can meet required international standard and provides a good reference in product R&D stage. What’s more,  it’s widely applied on Electronics, Telecommunication, Automobile, Packaging, Aerospace, Electric products, Pharmaceuticals industry, etc.

Neware Constant Temperature Test Chamber aims to test battery performance under constant temperature by simulating room temperature condition.  it can analyze and evaluate whether the battery can meet required international standard and provides a good reference in product R&D stage. What’s more,  it’s widely applied on Electronics, Telecommunication, Automobile, Packaging, Aerospace, Electric products, Pharmaceuticals industry, etc.

  1. Commuicated with our Neware software via TCP/IP port, and connected with Neware tester;
  2. A varity of dimension range could be made;
  3. Widely temperature range could be supported;
  4. Support various different batteries to test;
  5. Easy to operate the chamber;
  6. Standard protection included when gassing or over thermal issue;
  7. Buid-in over temperature protection and software protection limite to ensure your test safty.

 

1.1 Model MHW-200-110V-Chamber.pdf (104 downloads )
1. Application Constant temperature test of new energy soft-wrapped polymer cells and button cells

Electronics, electricians, instruments, materials, semiconductors and other manufacturers conduct constant temperature tests on non-flammable and non-explosive items

Constant temperature test for water analysis, bacteria, mold, microbial culture, preservation, plant cultivation, and breeding tests for environmental protection, agricultural and livestock, aquatic research institutions and production

2. Testing Material Limit This test equipment prohibits:

Testing or storage of flammable, explosive and volatile material samples

Testing or storage of samples of corrosive substances

Testing or storage of samples of strong electromagnetic emission sources

Testing and storage of radioactive material samples

Testing and storage of samples of highly toxic substances

Testing or storage of samples that may produce the above substances or objects during testing or storage

3. Volume and Dimension
4.1 Internal volume 200L
4.2 Internal dimension W500 mm×D500 mm×H800 mm
4.3 Overall dimension W600 mm×D700 mm×H1300 mm
4.4 Net weight About 180Kgs
4. Performance
5.1Testing environmental condition Ambient  temperature:+25℃

Relative humidity≤85%

No sample in the test box (No loading)

5.2 Temperature range 0~60℃
5.3 Temperature range ≤1℃ (No loading, stable temperature)
5.4Temperature deviation ±2.0℃(No loading, stable temperature)
5.5 Heating time 25℃→60℃ ≤30 min
5.6 Cooling time 25℃→0℃ ≤50 min
5. Structure
6.1 Heat Preservation Outside material: High quality cold-bonded steel plate, surface spray and paint treatment

Inner material: Stainless steel SUS304

Cabinet heat preservation material: Rigid polyurethane foam(insulation thickness: 50mm)

6.2 Air conditioning Axial flow fan、heater, evaporator
6.3Standard configuration Box door: hollow anti-fog tempered glass + stainless steel frame

Connecting hole(with soft rubber plug): 4 holes with φ80mm diameter

Caster: 4

Sample layer:

Sample layer with high temperature resistant electric insulation ;

Loading bearing (evenly distributed):10kg/ layer

Lighting: 1 pcs

6.4 Control panel Touch control buttons
6.5 Heater Stainless heating pipe

Heater control mode: contact-free equiperiodic pulse width adjustment, SSR (solid state relay)

6. Refrigeration System
7.1 Refrigeration compressor  

Fully enclosed compressor

7.2 Cooling mode Air cooled
7.3 Throttling device  Capillary
7.4 Refrigerant R134a
7.5 Welding process Nitrogen-filled shielded welding
8、Control System
8.1 Controller LED digital display + touch key controller
8.2 Setting method touch-key
8.3 Controlling method Forced circulation ventilation balance temperature regulation method. The control system controls the output of the heater according to the set temperature value through the PID automatic calculation output result, so as to achieve dynamic balance.
8.4 Communication Ethernet standard interface
8.5 Temperature control module Independent research and development (through high and low temperature impact, vibration and EMC and other related reliability performance testing)
7. The connection between chamber and battery tester
9.1 Equipment hardware connection  

battery testing machine and testing chamber connect through the channel cables and communications cables.

Weight 270 kg
Dimensions 88 × 75 × 146 cm
Brand

Neware

Model

MHW-200-110V

Origin

China

Certificate

CE CNAS