Neware CE6000-20V100A Regenerative Battery Pack Test System

Original price was: $23,500.00.Current price is: $21,500.00.

CE-6000 series regenerative battery module pack tester designed for secondary battery charge / discharge test , specialized in testing high power module / pack battery. It has a high dynamic response speed , high accuracy . Also , the regenerative function is included to greatly reduce power consumption during the discharge test .

The CE-6000 test system is designed to test high-capacity battery modules and packs. This battery test system is distinct from high-level accuracy, stability, dynamical rapid response speed, and multi-channel flexible features.

The CE-6000 system is capable of dual channel input and energy recovery systems to maximize the cost efficiency, allowing the electrical energy produced during discharge to be returned to the electrical grid.

The high-level sampling resolution is powered by the bidirectional high-frequency DC converter topology and the high-performance 24 bit multichannel AD converter chips (ADC), which are more compatible than the traditional single-range testers.

The battery testing formation and grading system software-Battery Testing System Data Analyzer(BTSDA) has variety of data analysis and export methods, and supported curve comparison.

CE-6000 series regenerative battery module pack tester designed for secondary battery charge / discharge test , specialized in testing high power module / pack battery. It has a high dynamic response speed , high accuracy . Also , the regenerative function is included to greatly reduce power consumption during the discharge test .

The CE-6000 test system is designed to test high-capacity battery modules and packs. This battery test system is distinct from high-level accuracy, stability, dynamical rapid response speed, and multi-channel flexible features.

The CE-6000 system is capable of dual channel input and energy recovery systems to maximize the cost efficiency, allowing the electrical energy produced during discharge to be returned to the electrical grid.

The high-level sampling resolution is powered by the bidirectional high-frequency DC converter topology and the high-performance 24 bit multichannel AD converter chips (ADC), which are more compatible than the traditional single-range testers.

The battery testing formation and grading system software-Battery Testing System Data Analyzer(BTSDA) has variety of data analysis and export methods, and supported curve comparison.

CE-6000 Specification
1Model
1. Material code CE-6012n-20V100A-H.pdf (957 downloads )
2Channels information
1. Channels quantity Channels quantity in one unit 12
2. Main channel Channel feature Constant current source and constant voltage source dual closed loop control
Channel control mode Independent control
Channel parallel connection Support max 4 channels parallel mode. Pulse and SIM tests will be disabled in channels parallel mode.

 

3Power grid side parameters
1.Input power   AC380V±15%  50/60±5Hz
2.Power factor   ≥99%(Full load)
3.THDi   ≤5%(Full load)
4.Input resistance   ≥1MΩ
5.Input power   28.2KW
6.Input current   42.9A/single
7.Overall system efficiency(Max)   90%
8.Noise   ≤65dB
9.Voltage and current sampling   Four-wire connection(same port for charging and discharging)
10.Power control module type   MOSFET
11.Input power wiring method   Three-phase-five wire system
12.Power input protection   Anti-surge, anti-silos, anti over or under frequency, anti over or under voltage, anti phase absence, etc.
4Functions and performances
1. Voltage Output range Charge:0V~20V
Discharge:3V~20V
Min discharge voltage 3V
Accuracy ±0.1% of FS
Resolution 24bit
2. Current Output range 0.5A~100A
Accuracy(independent range) ±0.05% of FS
CV cut-off current 100mA
Resolution 24bit
3. Power Single channel output power 2KW
Whole machine output power 24KW
4. Time Current response time ≤3ms
Current conversion time ≤6ms
Min. step time 0.1s
5. Charge/Discharge modes Charge/Discharge modes CCC, CVC, CC-CVC, CPC
CCD, CVD, CPD, CRD
Cut-off condition Voltage, Current, ΔTime, Capacity, -ΔV
6. Simulation Charge Current, Power
Discharge Current, Power
Switch Support continuous switching between charge and discharge
Cut-off condition Time, step line
Steps file lines 1,000,000
7. Pulse Mode Charge Current ,power
Discharge Current, Power
Min pulse 100ms
Pulse counts Up to 32
Charge and discharge switch supported
Cut-off condition Voltage, ΔTime
8. DCIR   DCIR by calculation
9. Safely protection Software protection Power off data protection
Offline mode function
Safety protection conditions can be set, including:voltage lower limit ,voltage upper limit ,current lower limit ,current upper limit ,delay time, etc.
Hardware protection Anti-reverse connection, over-voltage, over-current, over-temperature, etc.
5Data management and analysis
1. Step setting method   Form editing
2. Data report Recording conditions Minimum time interval: 10ms(connected with AUX channel:100ms)
Minimum voltage interval: 0.04V
Minimum current interval: 0.2A
Recording frequency 100Hz(connected with AUX channel:10Hz)
3. Database   MySQL database
4. Data output   Excel, Txt
5. Curve type   Templates available, customization supported
6. Bar code scanning   Support bar-code scanning function
Management and traceability of historical data
6Communication
1. Host computer communication   TCP/IP protocol
2. Communication port   Ethernet
3. Communication baud rate of the testers   1M
4. Host computer communication baud rate   10M~100M adaptive
5. Communication setup   Set up a LAN(local area network) through switches and routers
6. Communication expansion(optional)   Support CAN, RS485 communication and BMS communication, with DBC configuration function
7Environmental requirements, dimension and weight
1. Operation environment temperature   -10℃~40℃(When the temperature is 25±10℃, the accuracy error caused by temperature change is less than 0.005% of FS per degree)
2. Storage environment temperature   -20℃~50℃
3. Operation environment humidity   ≤70% RH(no moisture condensation)
4. Storage environment humidity   ≤80% RH(no moisture condensation)
5. Dimension W*D*H   600*800*1800(mm)
6. Weight   about 299.5KG

 

Weight 350 kg
Dimensions 65 × 85 × 185 cm
Brand

Neware

Model

CE-6012n-20V100A-H

Origin

China

Certificate

CE CNAS